ON-SITE HYDROSTATIC TESTING FOR DOOSAN BABCOCK

Tyne Pressure Testing has provided on-going, on-site hydrostatic testing and leak testing on fabricated stand pipes for Doosan Babcock.

The purpose of this testing was to verify the structural integrity of the stand pipes for use in a nuclear power station and to ensure that the components met industry standards BS EN 13480-5 and ASME B31.3.

Tyne Pressure Testing invested in various equipment to enable on-site testing including a transportable container which houses a pump, booster and data loggers. The container is fully self-sufficient, relying solely on air compressors to operate, with the structure acting as a safety barrier between the on-site engineers and the testing, allowing on-site testing in most circumstances.

The testing was carried out over several months at the Doosan Babcock facility. During testing, the stand pipes were placed within the restricted area and subjected to hydrostatic testing to varying pressure up to 261 Bar. A filtration system was employed to distil the water used ensuring that the components were not damaged by chemicals present in unfiltered water, such as chlorine. High pressure gas testing, otherwise known as leak testing, was also carried out to ensure that the pipes are leak-proof.

A Tyne Pressure Testing engineer was present on-site at Doosan Babcock daily to oversee the project from the safety of the container. Where required, night shifts minimised disruption within the facility and ensured that all tests were carried out within the client’s schedule.

Peter Holliday, Operations Manager at Doosan Babcock, said: “Tyne Pressure Testing tested multiple pipe spools which supported the successful delivery of a significant project to a major client of Doosan Babcock.”

Paul Smith, CEO at Tyne Pressure Testing, said: “All components tested have successfully passed all client and industry requirements, meaning they are suitable for use in nuclear power stations. We look forward to our continued partnership with Doosan Babcock.”

Our transportable, fully self-sufficient container and equipment means that we can facilitate on-site test sequences that satisfy qualification tests in accordance with various industry standards. Our expert engineers hold decades of experience in the execution of energy production componentry testing.

DISCUSS YOUR PROJECT NOW

FIND OUT ABOUT OUR ON-SITE TESTING CAPABILITES

Need help?

Call +44 (0) 191 209 7490 to talk to one of our experts